New E100 Lawn Tractor

100 Series
REQUEST A QUOTE

 (8) Recommended by 50.0%

Starting at: $1,499.00

REQUEST A QUOTE
Key Features
  • 17.5 HP* engine
  • Deep deck design helps lift grass for a superior cut
  • Improved deck lift lever raises and lowers deck easily
  • Operator station is wide and comfortable
  • Powerful battery helps with starts, even after lengthy storage

More Info

Features

Powerful engine features full-pressure lubrication for long life
17.5-hp (13.0-kW) engine17.5-hp (13.0-kW) engine
Engine oil filter and fuel filterEngine oil filter and fuel filter

A 17.5-hp (13.0-kW), single-cylinder engine has plenty of power and torque to handle tough mowing, mulching, and bagging conditions:

  • Electronic ignition for fast starts
  • Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
  • Cast-iron cylinder liner for long engine life
  • Overhead valves for excellent power and fuel economy
  • Anti-vibration system
  • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life, and extending the time between oil changes
    • More effective when operating the tractor on an incline
  • Large fuel filter for trouble-free operation
No-tools oil drain valveNo-tools oil drain valve

The no-tools oil drain valve is easy to access when changing engine oil.

Frame made of full-length welded steel for reliability
Solid one-piece frame Solid one-piece frame
Solid one-piece frame Solid one-piece frame

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

  • Full-length, robotically-welded frame design has high-strength steel rails for added strength and long life.
  • One-piece, steel fender deck is bolted to the frame.
Cast-iron front axle will not bend
Front axle and wheel spindleFront axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
  • Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
  • Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
Automatic transmission makes it easy to choose the exact travel speed for each operating condition
E100 TractorE100 Tractor

The automatic transmission allows the operator to easily choose the desired forward or reverse travel speed by simply depressing a single foot pedal; this is similar to the way the driver of an automobile with automatic transmission changes speed when depressing the accelerator.

Whether a slow speed for trimming or faster speed for open-area mowing is desired, the operator can easily adjust by how far the foot pedal is depressed.

Brake pedalBrake pedal
Automatic transmission forward/reverse shift leverAutomatic transmission forward/reverse shift lever

With the brake pedal depressed and the forward/reverse lever in the center position, the engine can be started. Once the engine is started, it is not necessary to use the brake pedal when selecting forward or reverse. Simply move the forward/reverse lever to select travel direction, and then press the automatic foot pedal to choose from an infinite number of travel speeds.

Speed control pedalSpeed control pedal
Operator foot depressing speed control pedalOperator foot depressing speed control pedal

With the automatic speed control pedal, the operator can choose from an infinite number of speeds forward or reverse:

  • Forward: 0 to 5.5 mph (0 to 8.9 km/h)
  • Reverse: 0 to 3.2 mph (0 to 5.1 km/h)
Operator station designed for comfortable operation
Comfortable operator station, right sideComfortable operator station, right side
Comfortable operator station, left sideComfortable operator station, left side

The operator station is designed for operator comfort and easy operation:

  • Controls are positioned where they are easy to reach and easy to use to control the tractor.
  • Steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
  • Seat is tilted back at the optimum angle to provide the most comfortable operator position.
Steering wheel and dashSteering wheel and dash
Wide footrest with debris channelsWide footrest with debris channels

Controls are easy to see and use:

  • Large, three-spoke steering wheel for greater operator comfort and control
  • Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

  • Footrest area is designed for optimum operator comfort
  • Debris-removing channels help keep the footrest area clean and dry
Comfortable seatComfortable seat
Easily-adjusted seat and beverage holderEasily-adjusted seat and beverage holder

The operator seat has an 11-in. (27.9-cm) back height for good support. It can be easily adjusted forward or rearward while the operator is in the seat, with seat travel of 5.5 in. (14 cm) and 10 different positions.

A beverage holder is located on the right-side fender for operator convenience.

Seat springs give a smoother rideSeat springs give a smoother ride
Seat tilted forward (shown on E180 Tractor)Seat tilted forward (shown on E180 Tractor)

Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

Seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Instruments and controls are easy to find and convenient to use
E100 Tractor mowingE100 Tractor mowing
Steering wheel and controlsSteering wheel and controls
Instruments and controls

The contoured dash has clean, attractive styling:

  • Controls are color-coded and labeled for easy identification by the operator.
  • Controls are logically placed and easy to reach.
  • The hourmeter makes it easy to tell when oil changes and other maintenance should be performed.
    • The service reminder feature will indicate that a general lubrication or mower/engine service interval has been reached.
    • When service is required, arrows will periodically flash for two hours.
  • Functional design of the controls provides good appearance and a comfortable feel.
Mower deck height adjustment
Mower deck height adjustment leverMower deck height adjustment lever

A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

  • Increments of 0.25-in. (0.64-cm) allow for fine-tuning the cut height.
  • Cut height is adjustable from 1-in. (2.5 cm) to 4 in. (10.2 cm).
Parking brake control
Parking brake leverParking brake lever
Brake/parking brake pedalBrake/parking brake pedal

The parking brake control is conveniently located on the tractor pedestal for easy access. It holds the brake pedal securely in the locked position.

Manual power take-off (PTO)
PTO engagement leverPTO engagement lever

The mower deck is engaged with the easy-to-see and easy-to-use yellow lever above the dashboard. Its placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor.

Serviceability is convenient with an easy-open hood
One-piece hood is easy to openOne-piece hood is easy to open
Service interval decal located under hoodService interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

  • Important service points are located within easy reach.
  • A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
  • Hourmeter includes a service reminder feature that flashes for two hours when a lubrication or mower/engine service interval has been reached.
Easy-to-service engine fuel and oil filtersEasy-to-service engine fuel and oil filters
Seat tilted up for easy access to fuel-fill openingSeat tilted up for easy access to fuel-fill opening

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

The seat tilts up and out of the way to make adding fuel easy.

The 100 Series Tractors are covered by a 2-year/120-hour bumper-to-bumper warranty*:

  • Premium features of 100 Series Tractors allow for this long warranty period.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

The Edge™ cutting system gives superior performance
Mowing with 42-in. (107-cm) mower deckMowing with 42-in. (107-cm) mower deck
42-in. (107-cm) mower deck42-in. (107-cm) mower deck

The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give the mower superior convenience, performance, and reliability.

The 42-in. (107-cm) two-spindle, three-in-one mower is constructed of 13-gauge, 0.090-in. (2.3-mm) steel for long life:

  • The mower deck has a rolled lip to provide greater strength and protection.
  • The deep-deck mower design lifts grass for a clean, even cut.
  • The smooth underside of the mower prevents grass buildup and evenly disperses grass clippings.
  • The rolled outer edge of the deck provides extra strength and protection.
  • Dual-stage E-coat and powder paint coatings provide extra protection from rust.
  • No tools are required to go from mulching to side discharge to rear bagging.
  • The blade-to-spindle design provides a unique mounting system for the mower blade that provides extra safety and convenience.
  • A mulch cover is an optional attachment that can be installed without tools to allow mulching with the standard mower blades.   
  • A high-performance mulch plug is an optional attachment that includes a mulch plug and special mulching blades for excellent performance.
  • A cut-and-throw, 6.5-bu (229-L) rear bagger is sold separately.
Mower wash port
Mower wash portMower wash port
Mower wash port with hose connectorMower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy:

  • A hose connector is included with mower deck.
StarLock™ blade design
StarLock blade designStarLock blade design

The StarLock blade design keeps the blade bolt at the correct torque for easy removal.

Optional blades for difficult mulching or bagging conditions are available.

Mower deck height adjustment
Mower deck height adjustment leverMower deck height adjustment lever

A spring-assisted, low-effort, ergonomically-designed lift lever simplifies setting and adjusting the mower cut height:

  • Increments of 0.25 in. (0.64 cm) allow the operator to fine-tune the cut height from 1 in. (2.5 cm) to 4 in. (10.2 cm). 
  • The lift handle is shaped and located for easy use, and is out of the way of entering or exiting operators.
CargO Mount™ system makes installation of rear bagger and other attachments easy
Rear CargO Mount pointsRear CargO Mount points
Front CargO Mount pointsFront CargO Mount points
Rear bagger is mounted with CargO Mount pointsRear bagger is mounted with CargO Mount points
Rear bagger is mounted with CargO Mount pointsRear bagger is mounted with CargO Mount points

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Two-year or 120-hour bumper-to-bumper warranty is standard

An exclusive 2-year or 120-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 100 Series Tractors.

  • The warranty is hassle free, with one company handling all of the paperwork.
  • Premium features of 100 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Specifications

Compare >>>

Select up to 2 models to compare specifications

John DeereE100 Lawn Tractor
Add Model
Add Model
Key Specs
Engine power 17.5 hp
13 kW
Engine manufacturer/model 31R977 (M31)
Transaxle type Automatic, continuously variable transmission (CVT)
Transaxle control Foot
Rear tires 20x8-8
Steering type Sector and pinion with single drag link and tie rod
Lift system type Lever on fender deck
Cutting width Edge™ mower deck, 42 in.
107 cm
U.S. warranty 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power 17.5 hp
13 kW
Displacement 30.5 cu in.
500 cc
Manufacturer/model 31R977 (M31)
Type Overhead valve, full-pressure lube, oil filter
Cylinders One
Governor Mechanical
Choke/speed control One lever
Cooling method Air
Air cleaner Cartridge
Oil drain No tools
Fuel system
Type Gasoline
Fuel delivery Pulse pump and carburetor
Fuel gauge Mechanical, viewable from seat
Fuel tank location Rear
Fuel fill opening Center, 1.75 in.
4.45 cm
Fuel tank capacity 2.4 U.S. gal.
9.1 L
Electrical system
Battery 12 V
300 CCA
Charging system Regulated, 9 amp
Engine starter Bendix type
Hourmeter Yes, with service reminder
Headlights Two standard, incandescent
Taillights or reflector No
Backup lights No
Rear work lights No
12-V outlet No
Transaxle
Type Automatic, continuously variable transmission (CVT)
Control Foot
Cruise control No
Oil cooler No
Oil filter Not applicable
Differential lock No
Forward speed 0-5.5 mph
0-8.9 km/h
Reverse speed 0-3.2 mph
0-5.1 km/h
Brakes Cone clutch
Chassis
Frame Full-length welded steel
Primer/paint E-coat/powder
Weight bracket Optional rear
Receiver hitch No
Front axle Cast-iron front axle, powdered-metal front wheel bushings
Spindle bushings No
Front tires 15x6-6
Rear tires 20x8-8
Hood material JD Loy, UV resistant
Fender deck material Stamped steel
Floor mats Yes, with debris removing channels
Storage No
Service interval decal Yes
Fender handles/grips No
Cup holder Yes
Equipment mounting CargO Mount™ system
Steering
Type Sector and pinion with single drag link and tie rod
Four-wheel steer Not available on this model
Steering wheel Standard, diameter - 12 in.
30.5 cm
Tilt steering wheel No
Turning radius 18 in.
45.7 cm
Uncut circle radius 25 in.
63.5 cm
Seat
Type One piece
Seat back height 11 in.
27.9 cm
Armrests No
Fore-aft adjustment While seated, 5.5 in.
14 cm
Seat suspension Tilt, two coil springs
Lift system
Type Lever on fender deck
Hydraulic outlets No
Mower cut height 13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments 0.25 in.
0.64 cm
Preset cut height No
Mower deck
Type Side discharge
Cutting width Edge™ mower deck, 42 in.
107 cm
Construction Stamped steel deck shell
Mower deck material Steel, 13 gauge
0.09 in.
2.3 mm
Mower wash port Yes
Mower drive system Manual power take-off (PTO)
Mower wheels Two
Mower wheel adjustment One bolt
Mower level adjustment Easy-level deck
Mower attachability
Type Slide under tractor
Front draft arms One spring clip
Rear draft arms Two spring clips
Mower wheels rotate No
Drive system Single belt
Safety
Meets ANSI standard Yes
Meets OPEI standard Yes
Backup protection Reverse Implement Option (RIO)
Safety video Yes
Buyer's notes
Notes JD Loy hood resists fading, won't rust or dent
Durable primer and powder paint finish
Full-length welded steel frame
Warranty 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers Standard, 42 in.
107 cm
Rear bagger 2-bag, 6.5 bu
229 L
Powered material collection
Mulching system Mulch cover or high-performance plug
Front thatcher
Front blade 46 in.
116.8 cm
Mid-mount blade
Snow blower Two-stage, 44 in.
111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
Sprayer Tow-behind, 15 U.S. gal.
56.8 L
Mounted, 15 U.S. gal.
Tow-behind only, 25 U.S. gal.
94.6 L
Spreader Tow-behind only, 125-175 lb
57.7-80 kg
Front bumper Two-bar styled front bumper
Brush guard
Weather protection Snow cab
Sun canopy Yes
Rear receiver hitch
Bucket holder Yes, single bucket
Grass striping Lawn striping kit
Tractor shovel
Front loader
Other equipment
Tow-behind tools 16
Dimensions
Height 40.2 in.
102 cm
Overall length 68.8 in.
174.8 cm
Wheelbase 48.9 in.
124.2 cm
Width with mower 54.9 in.
139 cm
Width with mower (deflector raised for storage) 44.8 in.
114 cm
Width without mower
Weight Mower, no fuel, 427 lb
194 kg

Accessories and Attachments

Carts

Utility Cart, 7P Poly - LP21935
Utility Cart, 8Y Convertible Poly - LP22755
Utility Cart, 10P Poly - LPPCT10JD
Utility Cart, 13 Steel - LPHDC13JD
Utility Cart, 16YS Swivel Poly - LP68186
Utility Cart, 17P Poly - LPPCT17JD

Complete MCS

6.5-bu (229-L) Hopper and Chute , 100 Series with 42-in. (107-cm) mower deck - BG20776
6.5-bu (229-L) rear bagger6.5-bu (229-L) rear bagger
6.5-bu (229-L) rear bagger6.5-bu (229-L) rear bagger

The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:

  • Two durable bags with a generous, 6.5-bu (229-L) capacity lift out for emptying and are easy to reinstall.
  • Efficient lower chute provides smooth flow of material to reduce chance of plugging.
  • Standard mower blades can be used for bagging, and high-lift blades are available for very difficult bagging conditions.
  • An air-exhaust duct directs air from the hopper back and toward the ground for clean operation.
  • A convenient bungee-cord fastener makes opening and closing the hopper easy.
  • It is easy to install and remove the hopper, and no tools are required after the initial installation.
  • Pins and spring clips hold the hopper and chute in place; there is nothing left to interfere with other attachments when removed.
  • Loose-knit bags allow more air to flow through to provide complete bag filling in wet and heavy grass conditions.

Specifications

 

Capacity

6.5 bu (229 L)

Material

Hopper top

Cross-linked high-density polyethylene (HDPE)

Chute

Polyethylene

Bags

Polypropylene

Filling

Directly into bags for emptying on the ground, into a trailer, or into plastic liners

Tractor compatibility and requirements

The 6.5-bu (229-L) rear bagger is compatible with:

  • 100 Series and S240 Tractors equipped with a 42-in. (107-cm) mower

 

Requirements and/or recommendations:

  1. Front ballast is recommended when bagging on hillsides.
  2. Use of rear tow-behind attachments that could come in contact with the hopper assembly is not recommended when the hopper assembly is installed.
  3. Special mower blades are not required.
6.5-bu (229-L) Hopper and Chute , 100 Series with 42-in. (107-cm) mower deck, Spanish version - BM22897
MCS 6 Dump-from-Seat Hopper, 100 Series and S240 with 6.5-bu (229-L) hopper - LP47167
Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)
MCS 6MCS 6
#

The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Sport Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.

Features:

  • Lightweight aluminum construction
  • Designed for full material expulsion
  • Easy access self-latching spring tripped handle
  • Ships almost fully assembled (5 minute handle assembly)
  • Installs in seconds (after initial assembly)

Benefits:

  • Easy - Convenient Access to dump handle directly from seat 
  • Clean - No material handling, no mess 
  • Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere 100 Series and S240 Sport Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

MCS 6 attachment
Order number: LP47167

Drawbar

Magnetic hitch pin - LP63768

Front Blade

46-in. (117-cm) Front Blade (100 Series and S240) - BG20943
46-in. (117-cm) Front Blade46-in. (117-cm) Front Blade
46-in. (117-cm) Front Blade used on loose material46-in. (117-cm) Front Blade used on loose material

The front blade is excellent for pushing light snow or other loose material.

The blade is constructed for good performance and long life:

  • Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.
  • Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.

For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:

  • Blade can be angled left, right, or used in the straight-ahead position.
Full working range
Full working rangeFull working range

The 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.

Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

Controlled from tractor seat
Operator blade controlOperator blade control

For operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.

Front blade lift and angling components are included as standard equipment:

  • Blade can be angled left, right, or used in the straight-ahead position.
  • For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Sport Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.
Tractor compatibility and requirements

The 46-in. (117-cm) Front Blade is compatible with:

  • 102, 115, 125, 135, 145, 155C, and 190C Tractors
  • L100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden Tractor
  • LA100, LA110, LA120, LA130, LA140, and LA150 Tractors
  • LA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 Tractors
  • D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 Tractors
  • S240 Sport Tractor

For model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer D100 Series and S240 Sport Tractors:

  • The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older D100 Series Tractors and the S240 Sport Tractor.
  • The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors (SN 700,001-).
    • A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.
Attachment D100 Series and S240 Sport Tractors
Model yearDescriptionOrder code/attachment number2015 and prior2016 and newer
2015 and prior46-in. (117-cm) Front BladeBG20020X 
2016 and newer46-in. (117-cm) Front BladeBG20943XX

Requirements and/or recommendations:

  • Rear weights and tire chains are required for additional traction.

Specifications

Overall width 46 in. (117 cm)
Overall height 14 in. (36 cm)
Clearing width 46 in. (117 cm)
Angling positions Three
Lift height 6.5 in. (17 cm)
Net weight 73 lb (33.1 kg)

Home Maintenance Kits

Home maintenance kit - LG271
LG271 home maintenance kit
Typical home maintenance kitTypical home maintenance kit
#

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

 

The LG271 home maintenance kit includes the following:

 

 Quantity

Description

1

Engine oil filter

2

Engine oil quart

1

Fuel filter

1

Air filter cartridge

1

Spark plug
Home maintenance kit - LG266
LG266 home maintenance kit
Typical home maintenance kitTypical home maintenance kit
#

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

 

The LG266 home maintenance kit includes the following:

 

 Quantity

Description

1

Engine oil filter

2

Engine oil quart

1

Fuel filter

1

Air filter cartridge

1

Spark plug

 

Miscellaneous

Battery charger and maintainer - TY25866
Bucket Holder (Single) - LPJD100
Bucket holder (single)Bucket holder (single)

Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100

Bucket holder (single) with bucket - LPJD100W
Bucket holder (single)Bucket holder (single)

Transporting mulch, plants, or debris is easy with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. Its all steel construction enables it to carry up to 40 lb (18.1 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100W

Bucket, 5 gal. (19 L) - LPJD400
Fuel-Protect for gasoline engines, 8 oz (237 mL) - TY27534

Mower Blades

Blade kit, 42X and 42-in. (107-cm) bagging - AM141034
StarLock™ blade design
42-in. (107-cm) Starlock blade mounting42-in. (107-cm) Starlock blade mounting
Blade kit, 42X and 42-in. (107-cm) mulching - AM141033
StarLock™ blade design
42-in. (107-cm) Starlock blade mounting42-in. (107-cm) Starlock blade mounting

Mower Decks

42-in. (107-cm) Tractor Grass Groomer - LP1001
Striping kit brush - top viewStriping kit brush - top view
Striping kit brush - side viewStriping kit brush - side view
Features and benefits
  • Homeowners can now achieve results just like the professionals
  • Brush is easy to adjust for varying mower cutting height
  • Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
  • The brush striping kit is a very economical and functional attachment

Compatible with the following:

  • 42X - 42-in. (107-cm) Side Discharge Mower for S240, X300, X304, X320, and X360 Tractors
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

42X - 42-in. (107-cm) tractor grass groomer

Order number: LP1001

42-in. (107-cm) replacement mower deck (100 Series) - AUC13429
42-in. (107-cm) Mower Deck42-in. (107-cm) Mower Deck

A complete mower deck can be ordered for replacement, if required.

This 42-­in. (107-­cm) Mower Deck comes with two medium­-lift blades for normal cutting and bagging conditions.

NOTE: When replacing a model year 2015 or older mower deck, also order GY22387 power take-off (PTO) cable.

Front blowout baffle for 42-in. (107-cm) Mower (42C/42X) - BM20505
Front blowout baffleFront blowout baffle

The front blowout baffle kit is for the 42-in. (107-cm) Convertible Mower and the 42-in. (107-cm) Edge™ Xtra Mower. It will reduce the amount of blowout when bagging leaves or other dry material.

Mower deck leveling gauge - AM130907

Mulch Kits

Mulch cover, 42 in. (107 cm) - GY00115
42-in. (107-cm) mulch cover42-in. (107-cm) mulch cover

The mulch cover is available as an option.

Mulch kit, 42 in. (107 cm)/42X - BM21816
42-in. (107-cm) mulching attachment (shown on X300 Series mower deck)42-in. (107-cm) mulching attachment (shown on X300 Series mower deck)

The mulching attachment for the 42-in. (106.7-cm) mower deck provides excellent performance. This is a high-performance mulching attachment that includes a mulch plug and special mulching blades.

Features include:

  • The blades included are designed to work with the StarLock™ blade mounting system used on the 42-in. (106.7-cm) mower deck for 100 Series Tractors, the S240 Tractor, and X300, X304, and X310 Tractors, and also for the 42-in. (106.7-cm) mower deck without the StarLock system used on LT Series Tractors.
  • The special mulching blades included can also be used for side discharging, although the overall cut quality may decline slightly.

NOTE: The mulch plug included in the BM21816 mulch kit can also be used on the 42-in. (106.7-cm) mowers with L100 Series Tractors, but the special mulching blades included will not fit the mower spindle; the standard mower blades are designed for mulching and can continue to be used with the mulch plug in place.

Protection

Front Bumper - BG20944
Front bumperFront bumper

The front bumper is an optional attachment for lawn tractors.

Benefits include:

  • Additional front-end protection
  • A more aggressive look for the tractor
Riding mower cover, medium deluxe - LP93617
Protective cover (medium deluxe)Protective cover (medium deluxe)
#

Features include:

  • Wipe-clean reinforced bottom around mower deck
  • Easy-on side handles makes snugging down cover a snap
  • Dual reinforced air vents let air circulate and help prevent ballooning in wind
  • Interior lining and integrated muffler heat shield
  • Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
  • Easy-on split back for fast fitting and easy access after installation
  • Handy storage pocket reverses into an attractive storage case
  • Two-year warranty

Cover provides heavy-duty protection for 100 Series, LT, LX, and S240 Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (medium deluxe)

Order number: LP93617

Riding mower cover, standard - LP93917
Seat cover, low deluxe yellow - LP40090
Seat cover, deluxe smallSeat cover, deluxe small
#

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

  • Access to lumbar adjustment controls
  • Large-capacity rear-zippered cargo pocket
  • Two side mesh beverage pockets
  • Elastic cord in bottom hem for a custom fit
  • Small size fits seats with backrests up to 11 in. (28 cm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe small
Order number: LP40090

Seat cover, low standard yellow - LP22704
Seat cover, medium size shownSeat cover, medium size shown
#

Seat cover protects new seats and renews old seats:

  • Four convenient pockets for keeping tools and gear within reach
  • Elastic cord in bottom hem for a custom fit
  • Small size fits seats 11-in. (28-cm) seat
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, small
Order number: LP22704

Spanish North American Kit

Spanish North American label and decal kit - BUC10321

Spark Arrester

Spark Arrester - GY22051
AM115838 spark arrester shownAM115838 spark arrester shown

Available to comply with laws in the state of California, requiring its use under certain conditions.

The law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered or grass-covered land (except on watered lawns) without a spark arrester.

For further information on this law, consult No. 442.5 of the California Public Resources Code. Also available in other states to comply with local ordinances or customer requests.

Sprayers

Mounted Sprayer, 15 gal. (57 L) (100 Series and S240) - LP53283
15-gal. (57-L) Mounted Sprayer for D100 Series, S24015-gal. (57-L) Mounted Sprayer for D100 Series, S240

The 15-gal. (57-L) tractor-mounted sprayer is compatible with the S240 and D100 Series Tractors. Convenient mounting, easy maneuverability, and overall versatility make this a perfect choice for a John Deere lawn tractor. It provides an excellent way to apply spray material, including liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 32-in. (81-cm) boom that sprays a 60-in. (152-cm) spray swath. It is also equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9.1 m). It has a custom mounting bracket that utilizes the existing frame holes for no-tools mounting after initial assembly. A recirculation kit is included.

Features include:

  • Custom mounting hardware uses existing frame holes
  • Mounts in seconds after initial assembly
  • Compatible with S240 and D100 Series Tractors
  • SHURflo® 100 psi, 2.1 gpm (8 L/min) on-demand diaphragm-type pump is designed for high-hour commercial applications. It can be run dry without damage.
  • The brass-tipped spray wand is included as standard equipment. It is constructed of non-corrosive polypropylene material with Viton® components for multi-use applications.
  • Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
  • Recirculation keeps material mixed and moving
  • Control valve directs spray to either the boom or spray wand
  • Convenient electrical hookup includes all necessary wiring
  • Rugged translucent yellow tank with molded fill-level indicators (in gal. and L)
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

15-gal. (57-L) Mounted Sprayer for D100 Series and S240 Tractors

Order number: LP53283

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

Tow-Behind Sprayer, 15 gal. (57 L) - LP19478
Tow-Behind Sprayer, 25 gal. (95 L) - LP19479

Spreaders

Pull-Type Spin Spreader, 125 lb (57 kg) - LP25353
Pull-Type Spin Spreader, 175 lb (80 kg) - LP25354
Tow-Behind Aerator-Spreader, 40 in. (102 cm) - LPAS40JD
Tow-Behind Broadcast Spreader, 130 lb (59 kg) - LP39087
Tow-Behind Broadcast Spreader, 175 lb (80 kg) - LPBS36JD

Sun Protection

Sun canopy - LP68122
Sun canopySun canopy

The sun canopy provides protection from the sun's rays and gives the operator some cooling shade during the hot summer days.

Quick sun protection for 100 Series Tractors:

  • Slips into CargO Mount™ system ports for quick installation
  • Protects operator from the sun’s rays
  • Tough woven polyester construction for strength and durability
  • Designed to fit 100 Series Tractors

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Sun canopy
Order number: LP68122

 

Thatchers

Tow-Behind Thatcherator, 40 in. (102 cm) - LPTA40JD

Tire Chains

TerraGrip traction belts (pair) for 20x8-8 tires - LP39981
Tire chains (pair) for 20x8-8 tires - TY15959
Tire chain with optional wheel weights on X728 TractorTire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using attachments such as a snow blower or front blade.

One pair of chains is included in each bundle.

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, and D125 Tractors.

TY16200 tire chains - 20x10-8, 20x10-10
NOTE: For LA135 SE, LA145, LA155, D130, D140, D150, D155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: 20x10-8 tires and 20x10-10 tires use the same chains as the height and width are the same. The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 22x9.5-12
NOTE: For LA165, LA175, D160, and D170 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

Lawn Sweeper, 42 in. (107 cm) - LPSTS42JD
Lawn sweeper dethatcher kit - LP42108
MT42C Multi-Tool 42 in. Combo (Plug Aerator and Thatcher) - LP39089
Tow-Behind Lawn Roller, 18 x 36 in. (46 x 91 cm) Poly - LPPRT36JD
Tow-Behind Plug Aerator, 40 in. (102 cm) - LPPA40JD
Tow-Behind Spiker Aerator, 40 in. (102 cm) - LPSAT40JD

Weather Enclosures

Weather enclosure - LP68121
Snow cab shown on a D100 Series TractorSnow cab shown on a D100 Series Tractor

The roomy steel-frame cab shields the operator against snow, rain, sun, and wind to make snow removal a more pleasant experience.

The snow cab is compatible with all 100 Series and S240 Sport Tractors:

  • D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, and S240
Zippered-access hole for control armZippered-access hole for control arm
Inside mesh storage pocketInside mesh storage pocket

Roomy steel frame cab shields against snow, rain, sun and wind.

Key features include:

  • Double-zippered access hole for control maneuverability
  • Interior mesh pockets to hold accessories
  • Super-clear vinyl windows are cold-crack tested to -4°F (-20°C)
  • Internal non-scratch magnets to ensure a custom fit - no tool necessary
  • Zippered doors have a snap-lock system to hold them open
  • Rear locking panel holds enclosure tight against tractor frame
  • Assembles and installs with standard hand tools
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Snow cab

Order number: LP68121

Weights

34-lb (15-kg) Wheel Weight (1), cast iron, 5-in. or 6-in. front wheel - BM17962
34-lb (15.4-kg) front wheel weight34-lb (15.4-kg) front wheel weight

A durable cast-iron weight can be mounted to each front wheel.

These weights are recommended for use when operating on slopes, especially when the tractor is equipped with a rear grass bagger or other rear-mounted equipment.

Each weight requires BM17978 mounting hardware.

Rear weight bracket (100 Series) - BG20627
 Rear weight bracket (BG20022 shown) Rear weight bracket (BG20022 shown)
Rear weight bracket shown with two 42-lb (19.1-kg) weightsRear weight bracket shown with two 42-lb (19.1-kg) weights

The rear weight bracket provides a tractor-mounted bracket for hanging two weights:

  • BG20627 replaces BG20022 and BG20499 rear weight brackets.
  • Clearance is provided for the carbon canister that is required on tractors sold in California.
  • BG20627 can be used in all applications where BG20022 and BG20499 were used.
Wheel weight mounting hardware for attaching one front wheel weight - BM17978

Weights

Quik-Tatch Weight, 42 lb (19 kg) - UC13263
42-lb (19-kg) Quik-Tatch weight42-lb (19-kg) Quik-Tatch weight
42-lb (19-kg) weights and optional mounting bracket42-lb (19-kg) weights and optional mounting bracket

The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).

Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.

X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:

  • One  M147986 weight retaining rod (Parts)
  • Two  M40461 spring clip (Parts)