New 220R Loader

2 Family (25-38HP)
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Compatible with 2032R and 2038R tractors
  • Quik-Parkā„¢ mounting system for easy on, easy off in minutes
  • Optional single-point hydraulic coupler lets you connect the hydraulics in one click, no fuss and no mess
  • Quik-Change bucket system allows fast attachment changeovers for moving from chore to chore

More Info

Features

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pinPivot pin

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

 

A nut ensures the pins remain in position.

 

A lubrication groove provides a path for lubrication.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Quik-Park™ loader mounting system
Quik-Park loader mounting systemQuik-Park loader mounting system
Quik-Park loader mounting systemQuik-Park loader mounting system

The 220R Loader is designed for easy removal/mounting to/from the tractor without tools.

 

The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.

 

To view a video of how the Quik-Park system works, click here.

 

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Specifications

Technical drawing
Technical drawing View diagram
Tractor
Model 2032R, 2038R
Front tire 23x8.50-14 4PR R4
Rear tire 14-17.5 6PR R4
Front axle configuration
Wheelbase 1725 mm
68 in.
Pump capacity 20.2 L/min
5.3 gpm
Rated pressure 17.23 MPa
2499 psi
Loader
Leveling configuration Non-Self Leveling
Bucket used 1450 mm
57 in.
Bucket weight 88 kg
194 lb
Lift capacity at full height Measured at pivot (U)
509 kg
1120 lbMeasured at 500 mm ahead of pivot (V)
365 kg
803 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
589 kg
1296 lbMeasured at 500 mm ahead of pivot (X)
445 kg
979 lb
Boom breakout force Measured at pivot (Y)
886 kgf
1949 lbfMeasured at 500 mm ahead of pivot (Z)
618 kgf
1360 lbf
Bucket rollback force capacity At maximum height (VV)
1044 kgf
2297 lbfAt 59-in. (1500-mm) lift height (XX)
1302 kgf
2864 lbfAt ground-level line (ZZ)
972 kgf
2138 lbf
Dimensions Maximum lift height (A)
2160 mm
85 in.At full height - bucket level(B)
1999 mm
79 in.At full height - bucket dumped (C)
1667 mm
66 in.
Overall length (I+F), ft (m) 3076 mm
121 in.
Overall height in carry position (J)
Digging depth (H) 149 mm
6 in.
Reach At maximum height (D)
756 mm
30 in.At ground level - bucket level (F)
1351 mm
51 in.
Bucket angle Dump angle, degrees (E)
36 degree (angle)Rollback angle, degrees (G)
34 degree (angle)Dump angle, ground
115 degree (angle)
Cycle times Loader raise, seconds
3.19 secondsLoader lower, seconds
1.94 secondsBucket dump, seconds
4.76 secondsBucket rollback, seconds
2.91 seconds

Accessories and Attachments

Ballast Box

Ballast Box - BW15073
Ballast Box Extension - BW15074

Buckets

49 In. (1250mm) Loader Materials Bucket - Quik Change - BW14144
Materials bucketMaterials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on/off. 

 

The round-back design helps material flow when filling or dumping the bucket.

 

The 1250-mm (49.2-in.) bucket is standard on the 120R Loader for field-installed orders.

 

For loaders installed out of Augusta, GA on tractors, the base bucket will be the 1350-mm (53-in.) bucket. 

 

It is also compatible with the 220R Loader, as the carrier assembly is the same (but may not cover the width of the model year 2017 2R Series Tractor). 

 

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

 

When the 220R Loader ordered field installed (palletized), the loader ships from Augusta, GA.

 

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).

53 In. (1350mm) Loader Materials Bucket - Quik Change - BW14145
Materials bucketMaterials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on/off.

 

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

 

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).

57 in (1450 mm) Heavy Duty Bucket with Bucket Loops - BW16787
Materials bucketMaterials bucket
Materials bucketMaterials bucket
Materials bucket side viewMaterials bucket side view

Now part of the bucket lineup for the 220R Loader is the 1450-mm (57-in.) heavy-duty bucket with loops.

 

For those conditions where a heavier, more durable bucket is needed, this bucket fits the demand.

 

Constructed with more material for additional strength to handle the toughest task and includes two loops on the top plate.

 

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

 

When the 220R Loader ordered field installed (palletized), the loader ships from Augusta, GA .

 

For non-model year 2017 2R Tractors, the bucket and other specific configuration parts will need to be ordered through Parts (such as mounting frames, and hood guard).

57 in (1450 mm) Materials Bucket - BW16609
Materials bucket front viewMaterials bucket front view
Materials bucket side viewMaterials bucket side view

Now part of the bucket lineup for the 220R is the 1450-mm (57-in.) standard-duty bucket.

 

This wider bucket is base equipment on the 220R for model year 2017 2032R, 2038R (and EU 2036R)

61 In. (1550mm) Loader Materials Bucket - Quik Change - BW14146
1550-mm (61-in.) materials bucket1550-mm (61-in.) materials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier use applications, use heavy-duty bucket.

 

The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on and off.

 

The round-back design helps material flow when filling or dumping the bucket.

Carrier

John Deere CUT Carrier - BW15939
Quik-change attachment carrier Quik-change attachment carrier
CUT carrier (quik-change) on 220R Loader and 1450-mm (57-in.) standard bucketCUT carrier (quik-change) on 220R Loader and 1450-mm (57-in.) standard bucket

The quik-change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.

This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.

John Deere CUT Carrier - BW16184

HITCH ADAPTERS

iMatch Bushing Kit - BW15056

Hood Guards

Hood Guard - BLV10705
Hood guard for 220R on 2038RHood guard for 220R on 2038R
220R on 2038R220R on 2038R

When ordering a 220R Loader for model year 2017 (and newer) 2R Tractors, and selecting factory-install option, the hood guard is included.

 

When ordering the 220R Loader field installed for model year 2017 (and future), the hood guard will be part of the palletized loader package.

 

Hood guard for older (model year 2016 and prior) tractors, hood guards will need to be ordered through Parts as they will not ship from factory (on pallet).

Hood Guard (MY '16 and Older 2032R, 2520, 2720 Tractors) - BW15634
Hood guard on 2520 TractorHood guard on 2520 Tractor
Hood guard for MY16 2032RHood guard for MY16 2032R

A hood guard can be ordered for a tractor without ordering a loader.

 

The hood guard protects the front of the tractor while operating the loader.

 

The bolt-on design stays with tractor when loader is removed

 

The hood guard can be tilted forward to open the hood for service (on some models as needed).

 

When ordering the 220R Loader for model year 2017 (and newer) 2R Tractors, and selecting factory-install option, the hood guard is included.

 

When ordering the 220R Loader field installed for model year 2017 (and future), the hood guard will be part of the palletized loader package.

 

Hood guard for older (model year 2016 and prior) tractors, hood guards will need to be ordered through Parts as they will not ship from factory (on pallet).

 

Hood Guard (MY '16 and older 2025R (Yanmar built), 2320, 2210 and 2305 Tractors) - BW15217
Hood guard shown on 2025 Tractor Hood guard shown on 2025 Tractor
Hood guard BW15217Hood guard BW15217

 

 

Hood guard BW15217Hood guard BW15217

A hood guard can be ordered for a tractor without ordering a loader.

 

The hood guard protects front of tractor while operating the loader.

 

The bolt-on design stays with tractor when loader is removed.

 

This hood guard can be tilted forward to open the hood for service (on some models as needed)

 

When ordering the 220R Loader for model year 2017 (and newer) 2R Tractors, and selecting the factory-install option, the hood guard is included.

 

When ordering the 220R Loader field installed for model year2017 (and future), the hood guard will be part of the palletized loader package.

 

Hood guard for older (model year 2016 and prior) tractors, hood guards will need to be ordered through Parts as they will not ship from factory (on pallet).

Hydraulics

Hoses and Parts (Couplers) - BW15406
Hoses and Parts (Couplers) - BW16612
Hoses and Parts (Couplers) - BW16978
Single Point Connector - BW16970

Miscellaneous

Anti -Drop Valve Kit - Bucket Circuit - BW16050
Anti -Drop Valve Kit - Lift Circuit - BW16049
Shut Off Valve - AH163186

Miscellaneous (Australia Only)

Anti Spill Kit - BXX10003
Service Locks - BXX10004

Mounting Frames

Mounting Frame - BLV10704

Mounting frame for 2R series.

Mounting Frame - BW16764

Mounting frame for 2R series.

Mounting Frame - BW16762

Mounting frame for 2R series.

Mounting Frame - BW16732

Mounting frame for 2R series.